Adjustable Over Voltage Under Voltage Protector Automatic Lightning Surge Power Leakage Protector

Product Description

220V over and under voltage protector resettable adjustable automatic reclosing circuit breaker household 63A leakage protector

   It is intended for a circuit of AC 50Hz/60Hz with maximum rated current of 63A to protect it and the equipment involved against overvoltage, low voltage ,current surge, leakage, lightning, etc. It is applicable to such electrical equipment as communication base stations, repeaters, video  surveillance, Safety City, cable TV, digital TV, network switches, optical transceivers, meteorological telemetry stations, seismic detection stations in various conditions. 
 

Specification
 

Rated voltage	AC220V 50Hz/60Hz
Power consumption	<3W
Supply voltage	AC140V~320V

 

When the voltage current is normal the product will Automatic reconnect.

Leakage range: 10~99mA(adjustable)(Default 30mA)  Leakage response time: ≤0.1S

Over voltage range: AC250~300V(adjustable)(Default 270V) Overvoltage response time: ≤0.1S

Low voltage range: AC150~190V(adjustable)(Default 170V) Low voltage response time: ≤0.1S

Over current range: 1~63A (adjustable)  (Default 40A) Overcurrent range response time: ≤0.1S

Short-circuit current: ≥31ln  Short-circuit response time: ≤0.1S

Error in real-time current, voltage and leakage current: ≤5%
 

Main technical parameters
 

Rated voltage: AC220V 50Hz/60Hz

Power consumption: <3W

Supply voltage: AC150V~300V

Leakage range: 10~99mA  Leakage response time: ≤0.1S

Overvoltage range: AC250~300V  Overvoltage response time: ≤0.1S

Low voltage range: AC150~190V  Low voltage response time: ≤0.1S

Overcurrent range: 1~63A  Overcurrent range response time: ≤0.1S

Short-circuit current: ≥31ln  Short-circuit response time: ≤0.1S

Error in real-time current, voltage and leakage current: ≤5%

Max. failure records: 999

Working conditions:

Temperature: -20°~55°  Storage temperature: -45°~80°

Humidity: ≤95%Rh  Atmospheric pressure: 70kPa~106kPa

Volume: 106X92X70mm

 Wiring:you don't need to connect to GND, if you don't have GND

Note 1: This switch cannot be used as a master breaker. Please install a miniature circuit breaker as an overload short-circuiting fitting in front of the switch.

Note 2: Please adjust the current after installation.

Note 3: This product is designed without isolation function. Please disconnect the front breaker before repairing the circuit.

Product Display
  Any requirements or question,welcome to "Send" us an e-mail Now!!!